Garmin 5008 Manuale Proprietario

V

IeWInG

 I

nformatIon

Use the Gauges screen to view engine gauges in an analog or digital format.

  NOTE: You must be connected to a NMEA (National Marine Electronics Association)  2000 

network capable of sensing engine data to view the gauges.

1. To view the Gauges from the Home screen, touch

>

.

2.  To select an analog or digital screen, touch

from the Gauges screen.

Touch

to select the number of engines (1 - 4), number of fuel tanks (1 or 2), and to

reset the odometer to zero.

  NOTE: For more than two engines, you can only use the digital gauges. For one or two engines, 

you can switch between analog and digital gauges.

Your unit can display video if you are connected to a video source (or sources) using the supplied 

video cable. See the 4000/5000 Series Installation Instructions for details.
To view video from the Home screen, touch 

 > 

.

Touch 

 to setup the following:

Source—selects the video device (Video 1 or Video 2) that displays the video. If you have two 

video sources and wish to alternate between the two, touch 

 to define the amount of 

time each video screen appears.
Aspect—selects a standard video or one that is stretched to fit the screen.

  NOTE: The video image can not be stretched to dimensions larger than what are provided by the 

video device, so it may not fill the entire screen of the 5012 or 5212 units.

Brightness—adjusts the brightness up or down. Select 

 to allow the unit to automatically 

adjust the brightness.
Saturation—adjusts the color saturation up or down. Select 

 to allow the unit to 

automatically adjust the saturation.
Contrast—

adjusts the contrast up or down. Select 

 to allow the unit to automatically 

adjust the contrast.
Standard—selects the video format used by the source (PAL or NTSC). Touch 

 to let the 

unit automatically select the source format.

•

•

•

•

•

•