Fortinet fortigate-3000 Installation Instruction

FortiGate-3000 and FortiGate-3600 FortiOS 3.0MR4 Install Guide

01-30004-0270-20070215

NAT/Route mode installation

Configuring the FortiGate unit

Table 11: NAT/Route mode settings

DHCP or PPPoE configuration

You can configure any FortiGate interface to acquire its IP address from a DHCP
or PPPoE server. Your Internet Service Provider (ISP) may provide IP addresses
using one of these protocols.

To use the FortiGate DHCP server, you need to configure an IP address range
and default route for the server. No configuration information is required for
interfaces that are configured to use DHCP.

PPPoE requires you to supply a user name and password. In addition, PPPoE
unnumbered configurations require you to supply an IP address. Use

Table 12

record the information you require for your PPPoE configuration.

Table 12: PPPoE

Administrator Password:

Internal

IP:

_____._____._____._____

Netmask:

_____._____._____._____

External

IP:

_____._____._____._____

Netmask:

_____._____._____._____

Port 1

IP:

_____._____._____._____

Netmask:

_____._____._____._____

Port 2

IP:

_____._____._____._____

Netmask:

_____._____._____._____

Port 3

IP:

_____._____._____._____

Netmask:

_____._____._____._____

Port 4

IP:

_____._____._____._____

Netmask:

_____._____._____._____

Port 4/HA

IP:

_____._____._____._____

Netmask:

_____._____._____._____

Port 5/HA

IP:

_____._____._____._____

Netmask:

_____._____._____._____

Network settings

Default Gateway:

_____._____._____._____

(Interface connected to

external network)

A default route consists of a default gateway and the name of the

interface connected to the external network (usually the Internet).

The default gateway directs all non-local traffic to this interface and

to the external network.

Primary DNS Server:

_____._____._____._____

Secondary DNS Server:

_____._____._____._____

User name:
Password: