Hussmann cw2-bge Installation Instruction

HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 (Printed in U.S.A.)

Honeycombs should be cleaned every six months.
Dirty honeycombs will cause merchandisers to
perform poorly. The honeycombs may be cleaned
with a vacuum cleaner. Soap and water may be
used if all water is removed from the honeycomb
cells before replacing. Be careful not to damage
the honeycombs.

1. Compress the honeycomb and remove it 

from its retainer.

2. Clean and dry the honeycomb.

3. After cleaning, replace in reverse order.

The interior back panels may be removed for
cleaning and to gain access to the evaporator coils.
Remove the rear interior back panels as follows:

1. D

2. Remove shelving.

3. Remove the honeycomb. 

4. Grasp the top of the rear panel. Lift the panel

up, then pull forward and out.

5. Replace parts in reverse order.

6. After cleaning or servicing the merchandiser,

reconnect the electrical power.

Honeycomb

Interior 

Back Panel