Sonance extreme xsstr User Guide
Maximum Heat
104 degrees C = (220.0 degrees Fahrenheit)
Maximum Cold
-40 degrees C = (-40.0 degrees Fahrenheit)
Maximum Humidity and Temperature
99% humidity @ 49 degrees C = (120.0 degrees Fahrenheit)
95% humidity @ -40 degrees C = (-40.0 degrees Fahrenheit)
The Extreme speakers meet or exceede the following:
Salt Spray - ASTM-B117
UV Test - ASTM-G23H
IEC / CEE Water Splashing Test - IP-X4
Vibration Test - ASTM D5112-98 and ASTM D3580-95
FlexBracket - part number 90-1315
Plastic template to reserve hole in new construction.
Designed to be used with the Roto-lockJ mounting system.
Staple Template - part number 90-1049
Thin plastic template for new construction to reserve hole in
new construction. Designed to be used with the Roto-lockJ
mounting system.
Coverplate - part number 90-0643
Designed to cover hole made by FlexBracket or Staple
Template until the speaker is installed.
Adapter Ring - part number 90-0768
A plastic ring used to cover a 13" diameter hole produced by
low grade commercial speakers.
Acoustic Enclosure - part number 91688
A 3/4" medium density fiberboard enclosure designed
specifically for the CR and Symphony series speakers.
Fire Rate Back Can - part number 91710
A metal can designed for the CR and Symphony series
speakers that meets the following fire testing criteria;
ASTM E119, CAN/ULC S101, NFPA 251, UBC 7-1, UL 263.
PN. 33-3025
I N S T A L L A T I O N I N S T R U C T I O N S
S O N A N C E S Y M P H O N Y E X T R E M E T R S E R I E S
INTRODUCTION
Thank you for purchasing Symphony Extreme TR series in-ceiling
speakers. When properly installed, this product will provide you with
years of entertainment pleasure.
To obtain the full potential of your new speakers, please read all
instructions before starting the installation. If you do not have the
necessary skills to install the speakers yourself, contact your authorized
Sonance dealer for installation options.
PARTS LIST
Extreme XTR
Each Extreme XTR speaker includes the following items:
(2) Sonance Extreme XTR speakers
(2) Paintable grilles
(2) Plastic paint plugs to protect speakers during painting
(1) Mounting cutout template ( in packaging )
(2) Sonance Extreme XTR speakers
(2) Paintable grilles
(2) Plastic paint plugs to protect speakers during painting
(1) Mounting cutout template ( in packaging )
1
DISTRIBUTED AUDIO PLACEMENT
OPTIONAL ACCESSORIES
The Sonance Symphony Extreme TR series speakers possess
extremely smooth and predictable off-axis frequency response. The
chart below shows how far apart the speakers can be placed in a
distributed audio system. The calculations are based on +/- 45
degrees of coverage from the speaker, and listener ear heights of 62"
for standing and 40" for seated.
Distributed Audio Placement
2 - CHANNEL AUDIO PLACEMENT
In a standard two channel audio system, the Extreme TR series
speakers should be separated approximately 6 to 10 feet apart. If
possible, the left and right speakers should be located the same
distance from the listening position.
Speaker spacing in feet for a distributed audio system
Standing Listener
Seated Listener
10 foot ceiling
12 foot ceiling
14 foot ceiling
8 foot ceiling
9.5'
13.5'
17.5'
21.5'
5.7'
9.7'
13.7'
17.7'
PARTS LIST
Extreme XSSTR
Each Extreme XSSTR speaker includes the following items:
(1) Sonance Extreme XSSTR speaker
(1) Paintable grille
(1) Plastic paint plug to protect speaker during painting
(1) Mounting cutout template ( in packaging )
(1) Sonance Extreme XSSTR speaker
(1) Paintable grille
(1) Plastic paint plug to protect speaker during painting
(1) Mounting cutout template ( in packaging )
ENVIRONMENTAL SPECIFICATIONS