Aethra d2000 lite User Manual
ISDN TESTER AND ANALYZER D2000
PRO
/D2000Lite/D2000 USER’S MANUAL
f
Alphanumeric keypad
Use these keys to input telephone numbers and alphanumeric data.
g
Microphone
Use this internal microphone to make voice calls.
h
Loudspeaker (on rear side)
Use this internal loudspeaker to hear voice calls. You can adjust the
speaker volume to your preference. See chapter 10.
speaker volume to your preference. See chapter 10.
1.5. Network connections
Three RJ45 connectors are located at the top of the instrument. Use one of these
connectors at a time to connect the instrument to a network reference point via a
network cable. Depending on the reference point, you must use one of network
cables supplied with the instrument. Refer to Fig. 1-2 for a description of the top
case.
connectors at a time to connect the instrument to a network reference point via a
network cable. Depending on the reference point, you must use one of network
cables supplied with the instrument. Refer to Fig. 1-2 for a description of the top
case.
Fig. 1-2 Top Case with Network Connections
E1
Use this connector for all simulation tests or monitoring on the E1
interface (Primary Rate, only for D2000
interface (Primary Rate, only for D2000
PRO
and D2000Lite).
S/T
Use this connector for all simulation tests or monitoring on the S or
T interface (Basic Rate).
T interface (Basic Rate).
U
Use this connector for all simulation tests on the U interface (Basic
Rate).
Rate).
14
CHAPTER 1 - INTRODUCING THE INSTRUMENT