Aethra d2000 lite User Manual
ISDN TESTER AND ANALYZER D2000
PRO
/D2000Lite/D2000 USER’S MANUAL
The interfaces supported with VX2000 option are: V.35, V.36, V.11 (X.21), V.24 e
CODIRECTIONAL.
CODIRECTIONAL.
Fig. 1-3
In order to connect to the line, use the appropriate cable
according to the selected mode. In order to operate correctly,
first connect the cable, then configure the device.
according to the selected mode. In order to operate correctly,
first connect the cable, then configure the device.
1.6. Operating modes
The table below, shows the operating modes available on the test equipment. Some
of that requires a specific option.
of that requires a specific option.
PRIMARY RATE (only for D2000
PRO
and D2000Lite)
TE-E1
The instrument simulates a Terminal Equipment on the
E1 interface.
E1 interface.
MON-E1
The instrument monitors the E1 interface in high impedance.
See chapter 5.
See chapter 5.
NT-E1
The instrument simulates a Network Termination on the
E1 interface.
E1 interface.
BASIC RATE
TE-S
The instrument simulates a Terminal Equipment on the S/T
interface.
interface.
MON-S
The instrument monitors the S/T interface in high impedance.
See chapter 5.
See chapter 5.
NT-S
The instrument simulates a Network Termination on the S/T
interface.
interface.
16
CHAPTER 1 - INTRODUCING THE INSTRUMENT