Aethra d2000 lite User Manual
USER’S MANUAL
ISDN TESTER AND ANALYZER D2000
PRO
/D2000Lite/D2000
Ensure that the batteries are placed in the battery compartment
as shown in Fig. 11-2. Use only the Aethra battery pack
(621070331).
as shown in Fig. 11-2. Use only the Aethra battery pack
(621070331).
7
Reinstall the battery cover and secure the two screws with
a screw driver.
a screw driver.
12.4. Display
12.4.1. Protective label
The test equipment is sent from the factory with a protective transparent plastic label
on the display screen for dust and scratches protection during the transport.
on the display screen for dust and scratches protection during the transport.
This label may reduce the brightness and the contrast of the screen, please remove
the label stick in order to have the better display of the screen.
the label stick in order to have the better display of the screen.
12.5. Ordering
Codes
The following tables list the user-replaceable parts for the instrument. To order
replacement parts or accessories, contact your nearest service center.
replacement parts or accessories, contact your nearest service center.
Item
Ordering Code
NiMH Batteries (installed)
621070402
Battery Charges, available model: Europe 230V, 50-400 Hz
531000064
Impedance adapter 120Ω/75Ω (RJ45 to BNC) for PRI
702000006
E1 adapter (RJ45 to N2) for monitor and NT
simulation, only for Germany
703232009
Adapter RJ45 F-F-F per Monitor e NT simulation
702000007
D1029N S/T-Bus Phantom Power adapter
703000004
RS 232-C PC Serial Interface Cable
506017030
Software “PC108 for Windows
” BASIC version
703291013
CHAPTER 12 - MAINTAINING THE INSTRUMENT
157