Aethra d2000 lite User Manual
ISDN TESTER AND ANALYZER D2000
PRO
/D2000Lite/D2000 USER’S MANUAL
PVc:
Informs if it is a pVc or not, and if Layer 2 is configured as DTE or
DCE.
DCE.
LCI:
LCI assigned.
DATA:
Number of transmitted and received DATA messages.
RR:
Number of transmitted and received RR messages.
RNR:
Number of transmitted and received RNR messages.
Reset:
Number of transmitted and received RESET messages.
ResCNF:
Number of transmitted and received RESET CONFIRM messages.
Restart:
Number of transmitted and received RESTART messages.
RestCNF: Number of transmitted and received RESTART CONFIRM
messages.
Reject:
Number of transmitted and received REJECT messages.
Int:
Number of transmitted and received INTERRUPT messages.
IntCNF:
Number of transmitted and received INTERRUPT CONFIRM
messages.
messages.
Diagnost: Number of diagnostic packets transmitted and received.
Invalid:
Number of invalid packets transmitted and received.
Outseq.:
Number of out of sequence packets transmitted and received.
3.11. IP Ping Test
Use this test to verify the correct operation of the Internet connection and check if a
remote network or host is reachable, by using the ICMP protocol (Internet Control
Message Protocol). The response from the remote will provide information about the
net structure.
remote network or host is reachable, by using the ICMP protocol (Internet Control
Message Protocol). The response from the remote will provide information about the
net structure.
76
CHAPTER 3 - PERFORMING A MANUAL TEST