Aethra d2000 lite User Manual
USER’S MANUAL ISDN TESTER AND ANALYZER D2000
PRO
/D2000Lite/D2000
4
Scroll through the result pages.
The result pages display the following information:
The Status line indicates the status of the test and the TFTP line indicates the status
of the file in transfer: Uploading, Downloading, Complete and, at the end of the test,
the disconnection causes.
of the file in transfer: Uploading, Downloading, Complete and, at the end of the test,
the disconnection causes.
►
Date, time and elapsed time
►
Number of the cycle in progress
►
Blocks, Bytes and Throughput, in Kbps, received in Downstream and
transmitted in Upstream. Data depend on the file length to be transferred and
on the type of transfer to be simulated.
transmitted in Upstream. Data depend on the file length to be transferred and
on the type of transfer to be simulated.
►
Local, Server and Destination IP address
►
Transmitted errors both in Downstream and Upstream
►
Minimum, average and maximum Throughput, in Kbps, received in
Downstream and transmitted in Upstream.
Downstream and transmitted in Upstream.
It’s also possible to interrupt the actual IP traffic phase, change the setup and start a
new IP traffic generation
new IP traffic generation
5
To interrupt the actual Ping traffic phase
6
To change the destination IP address and/or the other
parameters
parameters
7
To start a new Ping traffic generation using the same
internet connection
internet connection
3.13. Tone Generator and Measurements
The test allows to use the device as generator of sinusoidal signals included into the
phonic band 300 - 3400 Hz, with the possibility to perform both fixed frequencies and
programmed scansions. The output level is selectable as well between +3 and
-45dBm0.
phonic band 300 - 3400 Hz, with the possibility to perform both fixed frequencies and
programmed scansions. The output level is selectable as well between +3 and
-45dBm0.
CHAPTER 3 - PERFORMING A MANUAL TEST
83