Viking faxj-1000 Supplementary Manual
Inbound callers can touch tone route themselves to
any of the 4 phones. Inbound calls ring to the Phone
1 port if no touch tones are dialed. You can pick up
any phone and dial “#1” through “#4” to call another
phone. For outgoing calls, the ports are directly con-
nected to the telephone line (if available) and outward
dialing is normal.
any of the 4 phones. Inbound calls ring to the Phone
1 port if no touch tones are dialed. You can pick up
any phone and dial “#1” through “#4” to call another
phone. For outgoing calls, the ports are directly con-
nected to the telephone line (if available) and outward
dialing is normal.
A. “Mini Phone System” Application
1. When there is a telephone line connected to the FAXJ-1000, try to limit the duration of these internal calls. Incoming calls on the CO
line are ignored while the internal call is going on (ringing or connected).
2. The following is what happens on the other two ports (the two ports not involved with the internal call), if they attempt to go off hook
during the internal call:
a. While an internal call is taking place, if you go off hook on another port, you get a buzz sound (120 Hz) in the phone until you
hang up.
b. If an internal call has been initiated (but not answered yet) and you go off hook on another port, you are directly connected to
the phone that initiated the internal call and both phones hear ringback tones while the called phone continues to ring. When the
called phone answers, it is connected to the phone that initiated the call and the other phone is dropped and hears the buzz sound
(120 Hz).
c. While an internal call is in progress, if you go off hook on another port and remain off hook through the conclusion of the internal
call and both phones involved in the internal call hang up, you will be instantly switched from the buzz sound (120 Hz) to the tele-
phone line. If only one of the two phones involved in the internal call hang up, you will be switched from the buzz sound (120 Hz)
to a simulated busy signal and the phone that remained off hook will instantly be connected to the telephone line. .
Notes About the “Internal Calls”
PHONE/DATA/FAX SWITCH
VIKING
©
MODEL FAXJ-1000
PWR 13.8 V
AC
1
2
3
4
5
6
7
8
9 10
CO LINE IN
VIKING
ELECTRONICS
HUDSON, WI 54016
CO LINE IN
PHONE 1
FAX
MODEM
PHONE 2
RING DELAY
DISTINCTIVE RING
CNG DETECT
DISTINCTIVE RING
CNG DETECT
STATUS
1 2 3
PHONE 1
FAX
MODEM
PHONE 2
13.8V AC
Adapter
(included)
120V AC
C.O. Line
Model FAXJ-1000 with "FX1K-ST2" Software
Phone 3
Phone 1
Phone 4
Phone 2
PHONE/DATA/FAX SWITCH
VIKING
©
MODEL FAXJ-1000
PWR 13.8 V
A
C
1
2
3
4
5
6
7
8
9 10
CO LINE IN
VIKING
ELECTRONICS
HUDSON, WI 54016
CO LINE IN
PHONE 1
FAX
MODEM
PHONE 2
RING DELAY
DISTINCTIVE RING
CNG DETECT
DISTINCTIVE RING
CNG DETECT
STATUS
1 2 3
PHONE 1
FAX
MODEM
PHONE 2
13.8V AC
Adapter
(included)
120V AC
Model DLE-200B in
"Prison Phone" Mode
(install JP3 jumper)
Model FAXJ-1000 with "FX1K-ST2" Software
Phone 3
Phone 1
Phone 4
Phone 2
1
2
BUSY
RINGDOWN
DLE-200B
VIKING
©
1 2 3 4
ON
120V AC
120V AC
OR
Model
PS-2
470 Ohm, 1/2 Watt
(Radio Shack # 271-1115)
In this application, simulated talk voltage is required for the CO Line In of the FAXJ-1000. This can be provided by a
Viking model DLE-200B or a PS-2 power supply with a 470 ohm, ½ watt resistor. Pick up any phone and dial “#1” to
“#4” to call another phone.
Viking model DLE-200B or a PS-2 power supply with a 470 ohm, ½ watt resistor. Pick up any phone and dial “#1” to
“#4” to call another phone.
B. “Stand Alone Mini Phone System” or “Selectable Ringdown Device” Application
A
A
p
p
p
p
l
l
i
i
c
c
a
a
t
t
i
i
o
o
n
n
s
s