Viking Range vgbq0302t Installation Instruction
33
Performance Checklist
A qualified installer should carry out the
following checks:
following checks:
• All internal packaging removed.
• Specified clearances maintained to
combustible materials.
• Pressure regulator connected and set.
• Manual shut-off valve installed and
accessible.
• Check air shutter adjustment - sharp blue
flame, no yellow tipping.
• Check for gas leaks (odors) at all gas
connections.
• Each burner lights satisfactorily, individually
or with adjacent burners lit.
Any adjustments necessary that are the
result of the installer not following
instructions will be responsibility of the
installer, dealer or the end user of the
product.
result of the installer not following
instructions will be responsibility of the
installer, dealer or the end user of the
product.
Final Preparation
• Some stainless steel parts may have a
plastic protective wrap which must be
peeled off. The interior should be washed
thoroughly with hot, soapy water to
remove film residues and any dust or
debris before being used, then rinsed and
wiped dry. Solutions stronger than soap
and water are rarely needed.
peeled off. The interior should be washed
thoroughly with hot, soapy water to
remove film residues and any dust or
debris before being used, then rinsed and
wiped dry. Solutions stronger than soap
and water are rarely needed.
• All stainless steel body parts should be
wiped with hot, soapy water and with a
liquid cleaner designed for this material.
If buildup occurs, do not use steel wool,
abrasive cloths, cleansers, or powders!
liquid cleaner designed for this material.
If buildup occurs, do not use steel wool,
abrasive cloths, cleansers, or powders!
If it is necessary to scrape stainless steel to
remove encrusted materials, soak with hot,
wet cloths to loosen the material, then use
a wool or nylon scraper. Do not use a
metal knife, spatula, or any other material
tool to scrape stainless steel! Scratches are
almost impossible to remove.
remove encrusted materials, soak with hot,
wet cloths to loosen the material, then use
a wool or nylon scraper. Do not use a
metal knife, spatula, or any other material
tool to scrape stainless steel! Scratches are
almost impossible to remove.
34
Service & Parts
Only authorized replacement parts may be
used in performing service on the appliance.
Do not repair or replace any part of the
appliance unless specifically recommended in
the manual. All other servicing should be
referred to a qualified technician.
used in performing service on the appliance.
Do not repair or replace any part of the
appliance unless specifically recommended in
the manual. All other servicing should be
referred to a qualified technician.
Record the following information indicated
below. You will need it if service is ever required.
The serial number and model number for your
appliance are located on the identification plate
mounted on the bottom left side of the door
opening.
below. You will need it if service is ever required.
The serial number and model number for your
appliance are located on the identification plate
mounted on the bottom left side of the door
opening.
Model number
_________________________________________
Serial number
_________________________________________
Date of purchase
_________________________________________
Date installed
_________________________________________
Dealer's name
_________________________________________
Address
_________________________________________
Service & Registration