Vidikron VP-5000VHD User Guide

Regular cleaning will extend the life and performance of the PlasmaView VHD. Before 
cleaning, be sure to unplug the power cord from the power outlet.

Do not under any circumstances use solvents such as benzene or thinner to clean the 
PlasmaView VHD. Doing so may cause deterioration or peeling of paint from the display or 
remote control unit.

Wipe the display and remote control gently with a soft cloth. In the case of excessive dirt 
buildup, dampen a soft cloth with a diluted neutral cleaning detergent and after wringing 
the cloth thoroughly, wipe the component and then dry it with a dry soft cloth.

After dusting, wipe the screen gently using the supplied cleaning cloth or another soft cloth 
(cotton, flannel etc.). Do not use tissue or a rough cloth. The screen surface is easily scratched; 
do not rub it or hit it with a hard object.

If you clean the surface of the screen with a wet cloth, water droplets on the surface may 
enter into the product and cause a malfunction.

As a general rule, use a vacuum cleaner about once a month to clean the vents on the rear 
panel of the display of dust buildup (set the vacuum cleaner to its weakest setting when 
doing this). If not removed, accumulated dust can cause the internal temperature to increase, 
resulting in possible breakdown or fire.

5