Lexmark X5650 User Manual

To change the length of time between redials:

Press the arrow buttons until Redial Time appears, and then press 

.

Press the arrow buttons until the setting that you want appears, and then press 

.

See the instructions for sending a broadcast fax at a scheduled time.

These are possible causes and solutions. Try one or more of the following:

The fax modem is an analog device. Certain devices can be connected to the printer so that digital telephone
services can be used.

If you are using an ISDN telephone service, connect the printer to an analog telephone port (an R-interface
port) on an ISDN terminal adapter. For more information and to request an R-interface port, contact your ISDN
provider.

If you are using DSL, connect to a DSL filter or router that will support analog use. For more information, contact
your DSL provider.

If you are using a PBX telephone service, make sure you are connecting to an analog connection on the PBX.
If none exists, consider installing an analog telephone line for the fax machine. For more information on faxing
when using a PBX telephone service, see the instructions for setting up to fax while behind a PBX.

If the telephone line is being used by another device, wait until the other device is finished before sending the fax.

Make sure cable connections for the following hardware are secure, if applicable:

Power supply

Telephone

Handset

Answering machine

These are possible solutions. Try one or more of the following:

Resend the fax. There may have been a problem with the quality of the telephone line connection.

Place a test call to the telephone number to which you want to send a fax to make sure that it is working
correctly.

Troubleshooting