Lexmark X646e Quick Setup Guide
Lexmark™ X646
Quick Reference
Quick Reference
Loading paper and
specialty media
specialty media
Loading standard trays and
optional trays
optional trays
Note: Do not remove a tray when a job is
printing or when the control panel
green indicator light is blinking.
Doing so may cause a jam.
green indicator light is blinking.
Doing so may cause a jam.
1
Remove the tray from the MFP, and place it on
a flat, level surface.
a flat, level surface.
2
Squeeze the side guide tab, and slide the guide
to the outer edge of the tray.
to the outer edge of the tray.
3
Squeeze the rear guide tab, and slide the guide
to the correct position for the size media you are
loading.
to the correct position for the size media you are
loading.
4
Flex the sheets back and forth to loosen them,
then fan them. Do not fold or crease the print
media. Straighten the edges on a level surface.
then fan them. Do not fold or crease the print
media. Straighten the edges on a level surface.
5
Place the print media in the tray:
• Print side facedown for single-sided printing
• Print side faceup for duplex printing
Note:
Do not fill paper above the load line.
Overfilling the tray may cause jams.
6
Squeeze the side guide tab, and slide the guide
toward the inside of the tray until it lightly rests
against the edge of the media.
toward the inside of the tray until it lightly rests
against the edge of the media.
7
Insert the tray into the MFP.
Setting the Paper Type and Paper
Size
Size
1
Make sure the MFP is on.
2
Touch the Menus button on the printer control
panel.
panel.
3
Touch Paper Menu.
4
Touch Paper Size.
5
Touch the left or right arrow to change the size
for the desired tray.
for the desired tray.
6
Touch Submit.
7
Touch Paper Type.
8
Touch the left or right arrow to change the
media type for the desired tray.
media type for the desired tray.
9
Touch Submit.
10
Touch the home icon.
Loading the multipurpose feeder
1
Push the release latch, and lower the
multipurpose feeder.
multipurpose feeder.
2
Pull the tray extension out.
3
Slide the width guide to the far right.
4
Flex the sheets or envelopes back and forth to
loosen them, then fan them. Do not fold or
loosen them, then fan them. Do not fold or
Simplex
Duplex