Lexmark X204n User Guide
Received fax has poor print quality
These are possible solutions. Try one or more of the following:
R
ESEND
THE
DOCUMENT
Ask the person who sent you the fax to:
•
Check that the quality of the original document is satisfactory.
•
Resend the fax. There may have been a problem with the quality of the telephone line connection.
•
Increase the fax scan resolution, if possible.
T
HE
TONER
MAY
BE
LOW
When 88 Cartridge low appears or when you experience faded print, replace the cartridge.
M
AKE
SURE
THE
FAX
TRANSMISSION
SPEED
IS
NOT
SET
TOO
HIGH
Decrease the incoming fax transmission speed:
1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address
in the TCP/IP section.
in the TCP/IP section.
2
Click Settings.
3
Click Fax Settings.
4
Click Analog Fax Setup.
5
In the Max Speed box, select a lower speed.
6
Click Submit.
Solving paper feed problems
Paper frequently jams
These are possible solutions. Try one or more of the following:
C
HECK
THE
PAPER
Use recommended paper and other specialty media. For more information, see “Paper and specialty media
guidelines” on page 37.
guidelines” on page 37.
M
AKE
SURE
THERE
IS
NOT
TOO
MUCH
PAPER
IN
THE
PAPER
TRAY
OR
MANUAL
FEEDER
In the paper tray, make sure the stack of paper you load does not exceed the maximum stack height indicated in
the tray. In the manual feeder, do not load more than a single sheet of paper at a time.
the tray. In the manual feeder, do not load more than a single sheet of paper at a time.
Troubleshooting
149