Lexmark X204n User Guide

3–14.17 inches

76–360 mm

Sets the portrait height

If the height exceeds the maximum, then the printer uses the
maximum height allowed.

14 inches is the US factory default setting. Inches can be increased in
0.01-inch increments.

356 mm is the international factory default setting. Millimeters can
be increased in 1-mm increments.

Short Edge

Long Edge

Specifies the feed direction

Short Edge is the factory default setting.

Long Edge appears only if the longest edge is shorter than the
maximum length supported in the tray.

Note: When you select a menu item from the Reports menu, the indicated report prints.

Prints a report containing information about paper loaded into trays, installed
memory, the total page count, alarms, timeouts, the printer control panel
language, the TCP/IP address, the status of supplies, the status of the network
connection, and other information

Prints a report containing printer statistics such as supply information and
details about printed pages

Prints a report containing information about the network printer settings, such
as the TCP/IP address information

Note: This menu item appears only for network printers or printers connected
to print servers.

Prints a report containing information about configured shortcuts

Prints a report containing information about the last 200 completed faxes

Prints a report containing information about the last 100 attempted, received,
and blocked calls

Prints a report containing information about e-mail shortcuts

Prints a report containing information about fax shortcuts

Prints a report of all the fonts available for the printer language currently set in
the printer

Understanding printer menus