Bosch HES7052U User Guide

English 21

Note: Do not connect to probe receptacle until probe tip is properly inserted into 
meat.

2. Place roasting pan with meat in cold oven on recommended oven rack. Plug 

probe into the probe receptacle. The probe symbol will appear in display.

Note: The probe temperature can only be set when the probe is installed in the 
oven.

3. Press COOKING MODE then rotate knob to select BAKE, CONVECTION 

BAKE or CONVECTION  ROAST. 

4. Press START. The default oven temperature will appear.
5. Turn knob to change oven temperature if necessary.
6. Touch START.
7. Turn knob to set the probe temperature (desired end temperature of the food).
8. Press START.

The chosen oven temperature is displayed in the upper right hand corner of the 
display.

The probe temperature is displayed in the center to the left of the cooking mode. It 
starts at 80 degrees and  increases in 5°F increments until the chosen probe  tem-
perature is reached.

The oven is preheated when the beep signals once.

When the set probe temperature is reached, END appears in display and oven 
turns off.

1. Touch TEMPERATURE. Oven temp will flash in the display. 
2. Turn the knob to desired temperature and press START twice.

1. Touch TEMPERATURE. The oven temperature will flash. 
2. Press start and PROBE TEMP will flash.
3. Turn the knob to desired temperature and press START again.

Note:   Always remove probe from oven when cooking is complete.  The probe 
symbol will remain in the display until the probe is removed. Do not leave probe 
attachment in oven during self-clean. Oven will not self-clean with the probe 
installed in the oven

This section explains how to operate the warming drawer. See “Getting the Most 
Out of Your Warming Drawer” on page 32 for guidelines to improve warming 
drawer results.

The warming drawer will keep hot, cooked foods at serving temperature. Warming 
drawer settings are Low, Medium, and High.