Konica Minolta 5D Instruction Manual

The control dial moves the cursor left and right in the
menus. 

The menu section memory option in section 3 of the
setup menu memorizes the last menu section opened and
returns to that section when the menu button is pressed
(p. 106).

Use the left/right keys of the controller to highlight the
appropriate menu tab; the menus change as the tabs are
highlighted. 

In recording mode, press the menu button to open and close the menu. The four-way keys of the
controller move the cursor in the menu. Pressing the central button of the controller enters a setting.

When the required menu section is displayed, use the up/down key to scroll through the
menu options. Highlight the option whose setting needs to be changed.

Press the right controller key to display the settings; the current setting is indicated by
an arrow. To return to the menu options, press the left key.

Use the up/down key to highlight the new setting. If “Enter” is displayed, press the
central button of the controller to open the next screen.

Press the central button of the controller to select the highlighted setting.

Once a setting has been selected, the cursor returns to the menu options and the new setting is
displayed. Changes can continue to be made. To return to the recording mode, press the menu
button.

Activate the recording menu with the menu button. Tab 1 at the
top of the menu is highlighted.

To set image resolution (p. 72).

To set file type and compression (p. 72).

To set the flash mode of the built-in flash (p. 75).

To set ADI or pre-flash flash control (p. 79). 

To reset the recording-mode functions (p. 80).

To play back images after they are recorded (p. 74).

To apply noise reduction to long exposures (p. 74).

To set the order of the bracketing frames (p. 80).