Konica Minolta 5D Instruction Manual
101
100
Setup menu
LCD BRIGHTNESS
Monitor brightness is adjusted in section 1 of the setup menu.
Highlight “Enter” and press the central button of the controller to
open the LCD brightness setup screen.
Highlight “Enter” and press the central button of the controller to
open the LCD brightness setup screen.
Brightness is controlled in eleven levels. Use the
left/right controller keys to adjust the brightness, the
monitor adjusts accordingly.
left/right controller keys to adjust the brightness, the
monitor adjusts accordingly.
TRANSFER MODE
The data-transfer mode must be specified depending on whether the camera is used to transfer
data to a computer or print images with a PictBridge compatible printer. Select the appropriate
option:
data to a computer or print images with a PictBridge compatible printer. Select the appropriate
option:
Data storage - to transfer data between the camera and a computer. This option must be selected
when moving image files to a computer or when using the DiMAGE Master Lite software.
when moving image files to a computer or when using the DiMAGE Master Lite software.
PTP - to print images with a PictBridge compatible printer. See page 126 for more on PictBridge.
LCDbrightness
Enter
Date/Time set
Transfer mode
Video output
Audio signals
Language
Set LCD brightness
:enter
:adjust
High
Low
Press the central button of the controller to set the
level and complete the operation. Press the menu
button to close the screen without applying any
changes.
level and complete the operation. Press the menu
button to close the screen without applying any
changes.
VIDEO OUTPUT
Camera images can be displayed on a television. The video output can be changed between NTSC
and PAL. North America uses the NTSC standard and Europe uses the PAL standard. Check which
standard is used in your region to play back images on your television set.
and PAL. North America uses the NTSC standard and Europe uses the PAL standard. Check which
standard is used in your region to play back images on your television set.
1.
Turn off the television and the camera.
2.
Slide the card-slot door toward the back of the camera to release
the safety catch and open.
the safety catch and open.
3.
Insert the plug of the video cable into the camera’s video-out
terminal.
terminal.
4.
Plug the other end of the video cable into the video input terminal
on the television.
on the television.
5.
Turn the television on.
6.
Change the television to the video channel.
7.
Turn on the camera and press playback button. The camera’s
monitors do not activate when the camera is attached to a
television. The playback-mode display is visible on the television
screen.
monitors do not activate when the camera is attached to a
television. The playback-mode display is visible on the television
screen.
8.
View images as described in the playback section. Because of the
broadcast standard used to display television images, image
quality and resolution will appear lower than when displayed on a
computer monitor.
broadcast standard used to display television images, image
quality and resolution will appear lower than when displayed on a
computer monitor.
VIEWING IMAGES ON A TELEVISION
It is possible to view camera images on your television. The camera has a video-out terminal which
can be used to connect the camera to a television using the supplied video cable.
can be used to connect the camera to a television using the supplied video cable.