Hitachi ed-pj32 User Manual

42

Multifunctional settings

Using the buttons ▲/▼ switches the mode for the start up screen. 

The start up screen is a screen displayed when no signal or an 

unsuitable signal is detected.

MyScreen  ORIGINAL  TURN OFF

      

MyScreen is a screen you can register as a desired screen. The 

ORIGINAL screen is the existing standard screen. When the TURN 

OFF is selected, the BLACK screen is used.

• To avoid remaining as an afterimage, the MyScreen and the 

ORIGINAL screens will change to the BLANK screen after several 

minutes. If also the BLANK screen is the MyScreen or ORIGINAL, it 

will change to the BLACK screen.

• For the MyScreen, please refer to the item MyScreen below. About the 

BLACK and BLANK screens, please refer to the item BLANK. (41)

This item functions for capturing the MyScreen of the blank screen 

and the start up screen. Please execute displaying the input 

including the picture you want to capture.
1.  Choosing this item displays a dialog titled “MyScreen”. 

It will ask you if you start capturing the  

picture from the current screen. Please  

wait for the target picture to be displayed.

2.  Press the ENTER button when the picture is display.  

The picture will freeze and the frame for  

capturing appears. To restore the screen  

and return to the previous dialog, press  

the RESET or ESC button.

Please move the frame to the position of  

the picture which you want to use. 

Although the adjustable range will vary depending on inputs, and 

the frame may not move for some signals. To restore the screen 

and return to the previous dialog, press the RESET or ESC 

button.

• Registration takes several minutes. When the registration is 

completed, the registered screen and the message “MyScreen 

registration is finished.” are displayed for several seconds. If the 

registration failed, the message “A capturing error has occurred. 

Please try again.” is displayed.

MyScreen

Do you start capturing this picture?

,        +       :NO

ESC

,        :YES

ENTER

MyScreen

Move the capture area

as you want.

,       +        :RETURN

ESC

,       :NEXT

ENTER

My Screen

45%