Hitachi ed-pj32 User Manual

44

Multifunctional settings

With the OPTION menu, the items shown in the table 

below can be performed.

Choose an item using the cursor buttons ▲/▼ on the 

projector or remote control, and press the cursor button ► 

on the projector or remote control, or the ENTER button 

on the remote control to execute the item. Then perform it 

referring to the following table.

OPTION menu

Using the buttons ▲/▼ turns on/off the automatic signal search 

function.

TURN ON  TURN OFF

When the TURN ON is selected, detecting no signal automatically 

cycles through input ports in the following order.

RGB  S-VIDEO  VIDEO

      
Then when an input is found, the projector will stop searching and 

display the image.

Using the buttons ▲/▼ adjusts the time to count down to 

automatically turn the projector off.

Long (max. 99 minutes)  Short (min. 0 minute = DISABLE)

When the time is set to 0, the projector is not turned off 

automatically. When the time is set to 1 to 99, and when the passed 

time with a no-signal or an unsuitable signal reaches at the set 

time, the projector lamp will go off and the power indicator begins 

blinking. Please refer to the section “Turning off the power”. (20)

The lamp time is the time counted after the last resetting. It is 

shown in the OPTION menu as the usage time of the lamp. 

Performing this item resets the time.  

Pressing the RESET button on the remote control or the button ► 

on the projector displays a dialog to make sure.  

To perform reset, point at RESET using the button ▲.

RESET  CANCEL

• Please reset the lamp time only when you have replaced the lamp, 

for a suitable indication about the lamp.

• For the lamp replacement, please see the section "Lamp". 

 

(47, 48, 49)

LAMP TIME

0h.

RESET

CANCEL

AUTO OFF

ENABLE

10min.

AUTO OFF

DISABLE

0min.

MENU [RGB]

:SELECT

AUTO SEARCH
AUTO OFF
LAMP TIME
FILTER TIME
SERVICE

TURN OFF

0min

0h
0h

PICTURE
IMAGE
INPUT
SETUP
SCREEN
OPTION
EASY MENU