Hitachi ed-pj32 User Manual

45

ENGLISH

Multifunctional settings

The filter time is the time counted after the last resetting. It is shown 

in the OPTION menu as the usage time of the air filter. Performing 

this item resets the time. 

Pressing the RESET button on the remote control or the button ► 

on the projector displays a dialog to make sure. 

To perform reset, point at RESET using the button ▲.

RESET  CANCEL

• Please reset the filter time only when you have cleaned or 

replaced the lamp, for a suitable indication about the air filter.
• For the air filter care, please see the section "Air filter". (50)

Choosing this item displays the SERVICE menu. 

Choose an item using the buttons ▲/▼, and  

press the button ► or the ENTER button to  

execute the item.

FAN SPEED      AUTO ADJUST      GHOST

FACTORY RESET  FILTER MESSAGE

Using the buttons ▲/▼ switches the rotation speed of the cooling 

fans.

HIGH  NORMAL

The HIGH is the mode for use at highlands etc.

• Note that the projector is noisier when the HIGH is selected.

• Except for use at highlands, please use setting the NORMAL 

mode. The HIGH mode may shorten the lifetimes of the lamp.

Using the buttons ▲/▼ enables or disables the automatic 

adjustment.

ENABLE  DISABLE

Depending on conditions, such as input image, signal cable to the 

unit, environment around the unit, etc. the automatic adjustment 

may not work correctly.

In such a case, please choose DISABLE to disable the automatic 

adjustment, and make adjustment manually.

:SELECT

AUTO ADJUST

GHOST

FILTER MESSAGE     100h.

FACTORY RESET EXECUTE

SERVICE

FANSPEED      NORMAL

FANSPEED

HIGH

NORMAL

AUTO ADJUST

ENABLE

DISABLE

FILTER TIME

0h.

RESET

CANCEL

(to be continued)