Canon bj-20 User Manual
you can put the printer into high speed (110 cps), lower quality mode.
Selecting Printer Emulation
The BJ-20 allows you to emulate three types of printers: the Epson LQ-
510, the IBM Proprinter X24E, and the Canon BJ-l 30e printers. They
are further grouped under two modes: the LQ mode and the BJ-lOe
mode, as shown in the table below.
510, the IBM Proprinter X24E, and the Canon BJ-l 30e printers. They
are further grouped under two modes: the LQ mode and the BJ-lOe
mode, as shown in the table below.
Selecting
High
Speed
High
Speed
1
Make sure the printer is online.
2
Press the LF/FF and FWD ADJ switches simultaneously to light the HIGH
SPEED indicator.
SPEED indicator.
Selecting High
Quality
Quality
1
Make sure the printer is online.
2
Press the LF/FF and FWD ADJ switches simultaneously until the
HIGH SPEED indicator goes off.
HIGH SPEED indicator goes off.
Note
When the printer is running at high speed less ink is used,
thus extending the BJ cartridge life.
thus extending the BJ cartridge life.