Canon bj-20 User Manual

 

LQ 

Epson LQ-510

BJ- 1Oe 

IBM Proprinter X24E
Canon BJ-130e

The change is lost when the printer is turned off.

1

Make sure the printer is online.

2

Simultaneously press the two switches (PITCH and FONT). Each press 
turns the LQ indicator on or off.

Cautions

 

z

Whenever you use the control panel to change printer 
emulation, all current printer setting changes made from the 
control panel (such as font and character pitch) are lost; the 
BJ-20 refers to the DIP switches to form printer settings for 
the new emulation.

 

z

The eight DIP switches (1, 5-11) are assigned different 
functions in different printer modes (page 63). Therefore, 
physically changing a DIP switch position in a mode will 
affect the function assigned to this switch in the other mode 
if the printer emulation is changed with the control panel. 
For example in BJ-10e mode DIP SW 10 is used to set the 
buffer size, while in LQ mode this is used for font selection.

 

The change is not lost when the printer is turned off.

1

Make sure the printer is turned off.

2

Use a ball point pen (or similar object) to change the DIP switch 
12. When the DIP switch 12 set to OFF, the BJ-10e mode is 
selected.

If the DIP switch 11 is ON, the printer emulates the Canon BJ-
130e printer, otherwise it emulates the IBM Proprinter X24E 
printer.

When the DIP switch 12 set to ON, the LQ mode is selected.