Canon MF4270 Reference Guide
1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
6-7
Before Using the
Machine
Machine
Document and Paper
Copying
Sending and
Receiving
Receiving
Printing and
Scanning
Scanning
Network
Remote UI
System Manager
Settings
Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
10.
Press [
] or [
] to select the desired Ethernet
connection type, then press [OK].
<100 BASE-TX>: Establishes a 100Base-TX network connection.
<10 BASE-T>: Establishes a 10Base-T network connection.
<10 BASE-T>: Establishes a 10Base-T network connection.
11.
Press [Stop/Reset] to return to the standby
mode.
12.
Restart the machine.
Communication Environment Setup
To set up a configuration for communication between the machine
and computers on your network, use the following procedure.
and computers on your network, use the following procedure.
SNMP
SNMP helps monitor the state of the machine and collects
information on it. The default setting is <ON>.
The following two items can be set:
<COMMUNITY NAME>:
Sets the SNMP community name. You can specify up to two
community names.
The default setting is <public> for COMMUNITY NAME 1.
<SNMP WRITABLE>:
Enables the computers on the network to access the machine and
modify its settings if this item is activated. You can specify this
setting for each community separately.
The default setting is <ON> for SNMP WRITABLE 1 and <OFF> for
SNMP WRITABLE 2.
information on it. The default setting is <ON>.
The following two items can be set:
<COMMUNITY NAME>:
Sets the SNMP community name. You can specify up to two
community names.
The default setting is <public> for COMMUNITY NAME 1.
<SNMP WRITABLE>:
Enables the computers on the network to access the machine and
modify its settings if this item is activated. You can specify this
setting for each community separately.
The default setting is <ON> for SNMP WRITABLE 1 and <OFF> for
SNMP WRITABLE 2.
1.
Press [Additional Functions].
2.
Press
[
] or [
] to select <SYSTEM
SETTINGS>, then press [OK].
If the System Password has been set, enter the System Password
using the numeric keys, then press [OK].
using the numeric keys, then press [OK].
■