Canon MF4270 Reference Guide
1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
6-17
Before Using the
Machine
Machine
Document and Paper
Copying
Sending and
Receiving
Receiving
Printing and
Scanning
Scanning
Network
Remote UI
System Manager
Settings
Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Startup Time Settings
If you connect the machine to a switching hub, it may not be able
to connect to a network even though your network settings are set
correctly.
This occurs because the spanning tree process performed between
switching hubs prevents them from communicating with each
other immediately after the machine connects to a switching hub.
In this case, use the following procedure to delay the startup of
network communication.
The default setting is <60SEC>.
to connect to a network even though your network settings are set
correctly.
This occurs because the spanning tree process performed between
switching hubs prevents them from communicating with each
other immediately after the machine connects to a switching hub.
In this case, use the following procedure to delay the startup of
network communication.
The default setting is <60SEC>.
1.
Press [Additional Functions].
2.
Press
[
] or [
] to select <SYSTEM
SETTINGS>, then press [OK].
If the System Password has been set, enter the System Password
using the numeric keys, then press [OK].
using the numeric keys, then press [OK].
3.
Press
[
] or [
] to select <NETWORK
SETTINGS>, then press [OK].
4.
Press
[
] or [
] to select <STARTUP TIME
SET.>, then press [OK].
■
5.
Use
[
], [
], or numeric keys to set the time
period required to delay the startup of network
communications for the machine, then press
[OK].
communications for the machine, then press
[OK].
You can enter the value from 0 to 300 (seconds).
6.
Press [Stop/Reset] to return to the standby
mode.
7.
Restart the machine.