Canon MF4270 Reference Guide
1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
3-7
Before Using the
Machine
Machine
Document and Paper
Copying
Sending and
Receiving
Receiving
Printing and
Scanning
Scanning
Network
Remote UI
System Manager
Settings
Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
2 on 1 Combination
2 on 1 combination automatically reduces two-page document to
fit on the selected paper size. This feature can be used together with
both “Collate Copy” (see p. 3-6) and “Two-Sided Copy” (see p. 3-8).
fit on the selected paper size. This feature can be used together with
both “Collate Copy” (see p. 3-6) and “Two-Sided Copy” (see p. 3-8).
1.
Set
documents.
Place the first page on the platen glass if you are not using the ADF.
2.
Press
[COPY].
3.
Press [Collate/2 on 1] repeatedly to select <2 ON
1>, then press [OK].
If you want to use <2 ON 1> with “Collate Copy” (see p. 3-6) at the
same time, select <COLLATE+2 ON 1>, then press [OK].
If you want to use with “Two-Sided Copy” at the same time, go to
step 3 on p. 3-8.
same time, select <COLLATE+2 ON 1>, then press [OK].
If you want to use with “Two-Sided Copy” at the same time, go to
step 3 on p. 3-8.
■
4.
Use the numeric keys to enter the desired copy
quantity (1 to 99).
5.
Press [Start].
When you set the document on the platen glass, press [Start] for
each page. When scanning is complete, press [OK].
each page. When scanning is complete, press [OK].
If you press [OK] without scanning the second page, only the first
page will be printed on the left side of the paper.
A maximum of 1/8" (4 mm) margin will be produced between the
two reduced documents in 2 on 1 combination copying.
To cancel all settings, press [Stop/Reset].
When you switch the mode by pressing the mode keys such as
[FAX], all settings will be also canceled. If you want to keep the
settings, store the settings in <STANDARD SETTINGS> in <COPY
SETTINGS>. (See “STANDARD SETTINGS,” on p. 11-8.)
page will be printed on the left side of the paper.
A maximum of 1/8" (4 mm) margin will be produced between the
two reduced documents in 2 on 1 combination copying.
To cancel all settings, press [Stop/Reset].
When you switch the mode by pressing the mode keys such as
[FAX], all settings will be also canceled. If you want to keep the
settings, store the settings in <STANDARD SETTINGS> in <COPY
SETTINGS>. (See “STANDARD SETTINGS,” on p. 11-8.)
–
–
–
–
–