Canon MF4270 Reference Guide

4-26

 The machine automatically receives faxes in memory when printing 
is disabled under certain conditions (e.g., toner or paper has run 
out). 
 Load paper and press [OK] to start printing faxes stored in memory. 
 For toner empty, the machine automatically starts printing when 
the error is cleared. 

  The machine memory can store up to 256 fax jobs or approximately 256 
pages.*
* Based on the condition that the other party sends the fax by the 
imageCLASS MF4270 with ITU-T Standard Chart No. 1, standard mode. 
The maximum number of pages that the machine’s memory can store 
differs depending on the other party’s machine.  
 Once the pages are printed, they are deleted from the memory. 
 If the memory becomes full, you will not be able to receive the remaining 
pages. Contact the other party and ask them to resend the remaining 
pages of the fax. 

■

–

–
–

 You can set the machine to store all documents in memory without 
automatically printing them. 
 The default setting is <OFF>. 

 If the System Password has been set, enter the System Password 
 using the numeric keys, then press [OK]. 

 If the memory lock password has already been set, enter the 
password, then press [OK]. 

■