Canon lbp-3300 User Manual

Paper Problems

T

roub

leshooting

Paper comes out wrinkled.

Cause 1

Paper is loaded in the paper cassette or manual feed slot at an angle.

Remedy

Load the paper in the paper cassette or manual feed slot straight. (See "Loading 
Paper in the Paper Cassette," on p. 2-18, "Loading Paper in the Manual Feed 
Slot," on p. 2-25)

Cause 2

Paper is damp since the paper has been stored in unsuitable condition.

Remedy

Replace the paper with new one and print again. (See "Paper Requirements," 
on p. 2-2)

Paper curls.

Cause 1

Paper is damp since the paper has been stored in unsuitable condition.

Remedy

Replace the paper with new one and print again. (See "Paper Requirements," 
on p. 2-2)

Cause 2

Paper is inappropriate.

Remedy

Replace the paper with one that can be used with this printer. (See "Paper 
Requirements," on p. 2-2)

Cause 3

The paper is too thin.

Remedy

Set [Paper Type] to [Plain Paper L] in the printer driver.
In order to specify the setting for [Paper Type], display the [Paper Source] sheet.

Cause 4

Paper that curls easily is output to the face-down output tray.

Remedy

Switch the output tray to the face-up output slot when printing transparencies, 
labels, or envelopes which tend to curl. (See "Output Tray," on p. 2-14)

White dust is attached to the printed transparencies.

Cause

The transparencies were printed just after another type of paper was printed 
continuously.

Remedy

If you print transparencies after printing paper other than transparency 
continuously, chipped paper may attach to the transparencies when they are 
output. In this case, wipe and remove the chipped paper with a soft cloth.