Canon lbp-3300 User Manual
7-48
Miscellaneous Problems
T
roub
leshooting
7
Miscellaneous Problems
NOTE
For details on problems on installing the optional network board, see "Chapter 4
Troubleshooting" in Network Guide.
Troubleshooting" in Network Guide.
LBP3300 does not function properly.
Cause 1
LBP3300 is not specified as the default printer.
Remedy
Specify it as the default printer.
Cause 2
The CAPT software may not be installed properly.
Remedy
In order to check if the CAPT software is installed properly, print from an
application. If you cannot print properly, uninstall the CAPT software and install
it again. (See "Uninstalling the CAPT Software," on p. 3-79, "Installing the
CAPT Software," on p. 3-5)
application. If you cannot print properly, uninstall the CAPT software and install
it again. (See "Uninstalling the CAPT Software," on p. 3-79, "Installing the
CAPT Software," on p. 3-5)
Excessive time is required until the next job starts after finishing a job.
Cause
The printer cools down the fixing unit so that the print quality is maintained.
(Especially after paper with a narrower width is printed)
(Especially after paper with a narrower width is printed)
Remedy
Please wait a moment. The printer cools down the fixing unit automatically.
When the printer finished cooling down the fixing unit, the printer begins
printing.
When the printer finished cooling down the fixing unit, the printer begins
printing.
CD-ROM Setup does not appear automatically. (Windows 98/Me)
Cause
[Auto insert notification] is not selected.
Remedy
Display the properties for the CD-ROM drive from [Device Manager] and select
[Auto insert notification] in the [Settings] sheet.
[Auto insert notification] in the [Settings] sheet.