Canon lbp-3300 User Manual

Bef

ore Y

ou 

Star

t

Connecting to a Computer

NOTE

•

If a Wizard appears after connecting the USB cable by the Plug and Play automatic 
setup, install the software for this printer using either one of the following 
procedures. For more details, see "Installing the CAPT Software," on p. 3-5.
- Click [Cancel] and install the software from CD-ROM Setup.
- Install with Plug and Play.

•

If you are not sure about the USB cable that is supported by the computer you are 
using, contact the store where you purchased the computer.

If the optional network board (NB-C1) is installed, the printer can be connected to 
the network using a Category 5 twisted pair cable. Have cables or a hub ready as 
needed.

NOTE

•

For details on the procedure for installing the network board, see "Network Board," on p. 
6-19.

•

If this printer is connected to a network, network settings will need to be configured, the 
printer will need to be installed as a network printer, the print server will need to be 
configured. For details on these settings, see the instruction manual supplied with the 
network operating system or "Network Guide".

■ Network Environment

The optional network board supports 10BASE-T/100BASE-TX connections.

•

When connecting to a 10BASE-T Ethernet network

LAN Connector

10BASE-T Hub

Computer with 
10BASE-T Connector

Computer without 
10BASE-T Connector

10BASE-T 
Network Board

10BASE-T Cable