Canon lbp-3300 User Manual

Loading and Outputting P

aper

2-sided Printing

This printer is equipped with a function that can perform 2-sided printing. Plain 
paper and heavy paper (91 - 120 g/m

2

) of A4, Legal, and Letter sizes can be used 

for automatic 2-sided printing.

IMPORTANT

•

You cannot perform automatic 2-sided printing on heavy paper (121 - 163 g/m

2

), 

transparencies, labels, Index Card, and envelopes.

•

During automatic 2-sided printing, do not touch the paper until it is output to the face-
down output tray completely. During automatic 2-sided printing, the paper is first output 
partially after the front side is printed, and then it is fed again to be printed on the reverse 
side.

•

Be sure to close the output selection cover before performing automatic 2-sided printing.

NOTE

When the last page for the 2-sided printing is 1-sided printing, the printer prints faster 
than normal 2-sided printing by clicking [Finishing Details] in the [Finishing] sheet and 
[Advanced Settings] in the [Finishing Details] dialog box, and then selecting the [Print 
Last Page in 1-sided Mode when 2-sided Printing is Set] check box in the [Advanced 
Settings] dialog box. However, when printing punched paper or previously printed paper, 
the orientation or printing surface of the last page may differ from other pages. In this 
case, clear the check box.

NOTE

•

On automatic 2-sided printing, the reverse side of the paper is printed first, 
therefore the paper should be loaded in the opposite orientation to that for 1-sided 
printing. When printing paper such as a letterhead in which faces and directional 
orientations specified, load paper as follows.