Canon lbp-3300 Network Guide

Managing the Printer Using the Remote UI

Managing the Pr

inter in the Netw

or

k En

vironment

This section describes the procedures for performing the following management 
options using the Remote UI.

•

Restricting the Users Who Can Print (See p. 3-4)

•

Restricting the Users Who Can Monitor/Change the Settings Using the SNMP 
Protocol (See p. 3-10)

•

Restricting the Users Who Can Perform the Multicast Discovery (See p. 3-18)

•

Restricting the Devices That Can Access with MAC Addresses (See p. 3-23)

•

Obtaining/Checking the Security Access Logs (See p. 3-29)

•

Initializing the Network Settings (See p. 3-37)

You can also perform these management options using FTP Client.

IMPORTANT

•

If you are not sure about the IP address of this printer, refer to the Network Status Print 
(See "Checking the Operations with Network Status Print," on p. 2-57) or ask the 
administrator of the printer.

•

Use Netscape Navigator/Communicator 4.7 or later or Internet Explorer 4.01SP1 or later 
as the web browser.

•

You cannot connect the computer to the printer via a proxy server. If you are using a 
proxy server, perform the following settings. (The setting varies depending on the 
network environment.)
- On the settings for the proxy server of the web browser, add the IP address of this 

printer to [Exceptions] (The addresses that do not use the proxy server).

•

Configure the web browser so that you can use Cookie.

•

If multiple Remote UIs are running simultaneously, the latest setting is effective. It is 
recommended that only one Remote UI should be running at a time.

NOTE

Depending on the system environment, the screen for the Remote UI is not displayed. In 
this case, enter "http://<the IP address of this printer>/cab/top.shtml" in [Address] or 
[Location] to redisplay the screen.