Canon lbp-3300 Network Guide

Managing the Printer Using the Remote UI

Managing the Pr

inter in the Netw

or

k En

vironment

f

f

f

f [Security Access Log]

Displays the obtained security access logs. The date and time when the 
access was locked, IP address, port number, restriction type (any one of 
[PRINT] (Rejected TCP/IP Print Jobs), [SNMP] (Rejected SNMP Monitoring/
Setting Changes), or [SLP] (Rejected Multicast Discoveries)) are displayed.

NOTE

Up to 100 logs can be obtained. When the number of the logs exceeds 100, the 
logs are deleted starting from the oldest one.

If you want to reset the network board to the default values, use any method from 
among Remote UI, FTP Client, and NetSpot Device Installer.

This section describes the procedure for initializing the network settings using the 
Remote UI. For details on initializing the network settings using FTP Client or  
NetSpot Device Installer, see "Initializing the Network Settings," on p. 5-8.

IMPORTANT

Make sure that the printer is not operating before initializing the network settings. If you 
initialize the print server while the printer is printing or receiving data, the received data 
may not be printed properly, or may result in paper jams or damage to the printer.

http://<the IP address or name of the printer>/

Input Example : http://192.168.0.215/