Freecom fhd 1 User Manual

FREECOM FHD-1

HAPTER

Hardware Installation

Since USB 2.0 is backwards compatible with USB 1.1, the FHD-1 can be connected

to all USB ports. When connected to a USB 1.1 port, however, the performance

(data transfer rate) of the FHD-1 will be much lower than when the drive is

connected to a USB 2.0 port.

For optimal performance, the FHD-1 should always be connected to a

USB 2.0 port. Freecom USB 2.0 PCI Host Controllers are available at

www.freecom.com.

1. Connect the large, 36pin connector of the Freecom

Cable II USB 2.0 to the FHD-1.

2. Connect the cable of the power supply to the FHD-1

and the power supply itself to the socket.

3. Connect the USB connector to a USB port of your

computer.