Ricoh 3224C Network Guide
Monitoring and Configuring the Printer
96
4
info
Use the "info" command to display
printer information such as paper
tray, output tray, and printer lan-
guage.
printer information such as paper
tray, output tray, and printer lan-
guage.
❖
❖
❖
❖ Printer information display
msh> info
Reference
For details about displayed con-
tents, see p.112 “Getting Printer In-
formation over the Network”.
For details about displayed con-
tents, see p.112 “Getting Printer In-
formation over the Network”.
ipp
Use the “ipp” command to configure
IPP settings.
IPP settings.
❖
❖
❖
❖ Viewing settings
The following command displays
the current IPP settings:
the current IPP settings:
msh> ipp
Example output:
Example output:
timeout = 900(sec)
auth = basic
auth = basic
• The “timeout” setting specifies
how many seconds the compu-
ter tries to send print jobs when
no connection can be made to
the network printer.
ter tries to send print jobs when
no connection can be made to
the network printer.
• The “auth” setting indicates the
user authorization mode.
❖
❖
❖
❖ IPP timeout configuration
Specify how many seconds the
computer waits before canceling
an interrupted print job. The time
can be entered between 30 to 65535
seconds.
computer waits before canceling
an interrupted print job. The time
can be entered between 30 to 65535
seconds.
m s h > i p p t i m e o u t { 3 0 -
65535}
65535}
❖
❖
❖
❖ IPP user authorization configuration
Use IPP user authorization to re-
strict users to print with IPP. The
default is “off”.
strict users to print with IPP. The
default is “off”.
msh> ipp auth {basic|di-
gest|off}
gest|off}
• User authorization settings are
“basic” and “digest”.
• Use “off” to remove a user's au-
thorization.
• If user authorization is speci-
fied, register a user name. You
can register up to 10 users.
can register up to 10 users.
❖
❖
❖
❖ IPP user configuration
Use the following command:
msh> ipp user
The following message appears:
The following message appears:
msh> Input user number (1
to 10):
Enter the number, user name, and
password.
to 10):
Enter the number, user name, and
password.
msh> IPP user name:user1
msh> IPP password:*******
After configuring the settings, the
following message appears:
msh> IPP password:*******
After configuring the settings, the
following message appears:
User configuration changed.
netware
Use the “netware” command to con-
figure the NetWare settings such as
the print server name or file server
name.
figure the NetWare settings such as
the print server name or file server
name.
❖
❖
❖
❖ Netware Printer Server Names
msh> netware pname
• Enter the NetWare print server
name using up to 47 characters.
❖
❖
❖
❖ Netware File Server Names
msh> netware fname
• Enter the NetWare file server
name using up to 47 characters.