Ricoh 3224C Network Guide

Using NetWare

59

This section describes the setting pro-
cedure for network printers in the
NetWare environment. In the Net-
Ware environment, you can connect
the machine as a “print server” or “re-
mote printer”.

❖ Setting procedure

• When using the machine as a

print server

A

 Installing SmartDeviceMon-
itor for Admin

B

Setting the network interface
board.

C

Turning the machine off and
then back on.

•  When using the machine as a

remote printer

A

Installing SmartDeviceMoni-
tor for Admin.

B

Setting the network interface
board. 

C

Setting NetWare. 

D

Starting the print server.

❒ This procedure assumes an envi-

ronment is already prepared for
normal  NetWare running the
printing service setting.

❒ The procedure is explained with

the following example settings:
• File server’s name …CAREE
• Print server’s name …PSERV
• Printer’s name …R-PRN
• Queue name …R-QUEUE

❖ Using SmartDeviceMonitor for Admin

To use the machine in a NetWare
environment, use SmartDevice-
Monitor for Admin to set the Net-
Ware printing environment. 

❒ The NetWare Client provided

by Novell is required to set the
printing environment using
SmartDeviceMonitor for Ad-
min under the following envi-
ronments:
• NDS mode in Windows 95/

98/Me

• NDS or Bindery mode in Win-

dows 2000/XP, Windows NT
4.0

Reference
For details about installing
SmartDeviceMonitor for Ad-
min, see p.77 “Installing Smart-
DeviceMonitor for Admin”.

❖ Printers listed by SmartDeviceMoni-

SmartDeviceMonitor for Admin
lists printers connected to the net-
work. If you cannot identify the
machine you want to configure,
print configuration page, and then
check the machine name.

Follow the procedure below to con-
nect the machine as a print server us-
ing NetWare 3.x.

A

B

C

D