Ricoh 2035e User Manual

Confirming the Connection

Using the IEEE 802.11b
(Wireless LAN)

AAAA

Make sure the LED of the IEEE
802.11b card is lit.

❖

❖ When using in infrastructure mode

If [LAN Type] on the [Interface Set-

tings]

/[Network] screen is not set to

[IEEE 802.11b]

, it does not light, even if

the main power is on.

If it is connected properly to the

network, the LED is green when in in-
frastructure mode. If the LED is blink-
ing, the machine is searching for
devices.

❖

❖ When using in ad hoc mode/802.11

ad hoc mode

If the IEEE 802.11b card is work-

ing, it is lit in orange.

If it is connected properly to the

network, the LED is green when in
ad hoc mode or 802.11 ad hoc mode.
If the LED is blinking, the machine
is searching for devices. The LED
will light after a few seconds.

BBBB

Print the configuration page to
verify settings.

Reference
For more information about
printing a configuration page,
see Printer Reference 2.

Checking the machine's radio wave
status

You can check the machine's radio
wave status using the control panel.
To check the radio wave status, press
[IEEE 802.11b]

under [LAN Type] on the

[Network]

screen.

AAAA

Press the

{{{{User Tools/Counter}}}} key.

BBBB

Press [System Settings].

CCCC

Press [Interface Settings].

DDDD

Press [IEEE 802.11b].

EEEE

Press [Wireless LAN Signal].
The machine's radio wave status
appears.

FFFF

After checking radio wave status,
press [Exit].

GGGG

Press the

{{{{User Tools/Counter}}}} key

to return to the User Tools/Coun-
ter menu.

ZGDH600J

1
2

ZGDH600J

1
2