Ricoh 2035e User Manual

9. Appendix

Remote Maintenance by telnet

You can view printer status and con-
figure the network interface board us-
ing telnet.

Note

❒ You should specify a password so

only the network administrator, or
a person with network administra-
tor privileges, can use remote
maintenance.

❒ The password is the same as that

used for configuring the network
interface board with a Web brows-
er.

❒ If you change a password using re-

mote maintenance, the other pass-
words are also changed.

Using telnet

Follow the procedure below to use
telnet.

Limitation

❒ Only one person at a time can be

logged on to do remote mainte-
nance.

AAAA

Using the machine's IP address or
host name, start telnet.

% telnet IP_address

Note

❒ In order to use the host name in-

stead of the IP address, you
must write it to the hosts file.

BBBB

Enter the password.

Note

❒ The default is “password”.

CCCC

Enter a command.

Reference
For more information about tel-
net commands, see p.90 “Com-
mands List”.

DDDD

Quit telnet.

msh> logout

When the configuration changes, a
message asks whether the changes
should be saved or not.

EEEE

Enter “yes” to save the changes,
and then press the

{{{{ENTER}}}} key.

If you do not want to save the
changes, enter “no”, and then
press the

{{{{ENTER}}}} key. If you want

to make additional changes, enter
“return”, and then press the

{{{{EN-

TER

}}}} key.

Note

❒ If “Cannot write NVRAM infor-

mation” appears, the changes
are not saved. Repeat the steps
above, as necessary.

❒ The network interface board is

automatically reset when the
changes are saved.

❒ When the network interface

board is reset, active print jobs
already sent to the machine will
be finished. However, jobs not
already sent will be canceled.