Ricoh 2035e User Manual
Appendix
132
9
Precautions
Please pay attention to the following
when using the network interface
board. When configuration is neces-
sary, follow the appropriate proce-
dures below.
when using the network interface
board. When configuration is neces-
sary, follow the appropriate proce-
dures below.
Connecting a Dial-Up Router
to a Network
to a Network
When using NetWare (file server)
If the NetWare file server and printer
are on opposite sides of a router,
packets are sent back and forth con-
tinuously, possibly incurring com-
munications charges. Because packet
transmission is a feature of NetWare,
you need to change the configuration
of the router. If the network you are
using does not allow you to configure
the router, configure the machine in-
stead.
are on opposite sides of a router,
packets are sent back and forth con-
tinuously, possibly incurring com-
munications charges. Because packet
transmission is a feature of NetWare,
you need to change the configuration
of the router. If the network you are
using does not allow you to configure
the router, configure the machine in-
stead.
❖
❖
❖
❖ Configuring the router
Filter packets so they do not pass
over the dial-up router.
over the dial-up router.
Note
❒ The MAC address of the filter-
ing printer is printed on the
printer configuration page. For
more information about print-
ing a configuration page, see
Printer Reference 2.
printer configuration page. For
more information about print-
ing a configuration page, see
Printer Reference 2.
❒ For more information about
configuring the printer if the
router cannot be configured, see
the following instructions.
router cannot be configured, see
the following instructions.
Configuring the printer with
NetWare
NetWare
AAAA
Following the setup method de-
scribed earlier in this manual,
configure the file server.
scribed earlier in this manual,
configure the file server.
BBBB
Set the frame type for NetWare
environment.
environment.
Reference
For more information about se-
lecting a frame type, see p.17
“Setting Up the Machine on a
Network”.
For more information about se-
lecting a frame type, see p.17
“Setting Up the Machine on a
Network”.
Configuring the printer without
NetWare
NetWare
AAAA
When not printing, the network
interface board sends packets
over the network. Set NetWare to
“inactive”.
interface board sends packets
over the network. Set NetWare to
“inactive”.
Reference
For more information about se-
lecting a protocol, see p.17 “Set-
t i n g U p t h e M a c h i n e o n a
Network”.
For more information about se-
lecting a protocol, see p.17 “Set-
t i n g U p t h e M a c h i n e o n a
Network”.
When Using Network Utility
If the machine is connected to a net-
work, observe the following points
when setting up the machine or
changing settings:
For more details, see the operating in-
structions and Help for ScanRouter
V2 Lite/Professional and DeskTop-
Binder V2 Lite/Professional.
work, observe the following points
when setting up the machine or
changing settings:
For more details, see the operating in-
structions and Help for ScanRouter
V2 Lite/Professional and DeskTop-
Binder V2 Lite/Professional.