Ricoh 2035e User Manual
Checking the Transmission Result (TX File Status)
31
3
Checking the Transmission Result (TX File
Status)
Status)
You can browse a part of the Trans-
mission Result Report on the display.
mission Result Report on the display.
Note
r Only the transmission result of the
last 200 communications (recep-
tions & transmissions) are shown.
tions & transmissions) are shown.
r If a transmission is completed
while you are using this function,
the result will not appear. To view
the latest result, exit TX File Status,
and then try again.
the result will not appear. To view
the latest result, exit TX File Status,
and then try again.
r You can program one of the Quick
Operation keys with operations for
this function. Using the key allows
you to omit steps
this function. Using the key allows
you to omit steps
A and B.
A
Press
[
Information
]
.
B
Select
[
TX File Status
]
.
C
Check the transmission results.
Transmission results are dis-
played, from the latest result
down, in groups of six.
played, from the latest result
down, in groups of six.
Note
r When a fax is sent, “Destina-
tion” shows the Own Fax Num-
ber or Fax Header information
of a receiver. The e-mail address
and name programmed in the
destination list appears in the
"To" field of the sent Internet
Fax. For a transmission from a
computer, “-- LAN-Fax -->” is
shown.
ber or Fax Header information
of a receiver. The e-mail address
and name programmed in the
destination list appears in the
"To" field of the sent Internet
Fax. For a transmission from a
computer, “-- LAN-Fax -->” is
shown.
D
Press
[
Exit
]
twice.
The standby display appears.