Ricoh 2035e User Manual
Where Incoming Message are Delivered - Output Tray
105
5
Where Incoming Message are Delivered -
Output Tray
Output Tray
Specifying Tray for Lines
The optional extra G3 interface unit is re-
quired.
quired.
You can specify the document feed-
ing tray for each port (telephone or
LAN). For example, you can specify
documents received through the G3 -
1 port to be fed to the “Internal Tray
1” and documents received through
the G3 -2 port to be fed to the “Inter-
nal Tray 2”, facilitating separation of
files. You can also set the machine to
output Internet Faxes and ordinary
faxes onto different trays.
ing tray for each port (telephone or
LAN). For example, you can specify
documents received through the G3 -
1 port to be fed to the “Internal Tray
1” and documents received through
the G3 -2 port to be fed to the “Inter-
nal Tray 2”, facilitating separation of
files. You can also set the machine to
output Internet Faxes and ordinary
faxes onto different trays.
Note
r To use this function, specify the
port and destination using
[
Specify
Tray for Lines
]
. See p.144 “Reception
Tray Shift
The optional finisher is required.
When the optional finisher unit is se-
lected for fax output, you can use the
Tray Shift function whenever a fax or
report is printed.
This is useful for separating faxes
stacked in the finisher output tray.
For example, if the previous incoming
fax was output to the left, the next in-
coming fax will be output to the right
and vice-versa.
lected for fax output, you can use the
Tray Shift function whenever a fax or
report is printed.
This is useful for separating faxes
stacked in the finisher output tray.
For example, if the previous incoming
fax was output to the left, the next in-
coming fax will be output to the right
and vice-versa.
Note
r You can turn this function on or off
with the User Parameters. See
p.159 “User Parameters” (switch
19, bit 0).
p.159 “User Parameters” (switch
19, bit 0).