Ricoh 3224C User Manual

Monitoring and Configuring the Printer

Remote Maintenance by telnet

Important

❒ Remote Maintenance should be

password-protected so that access
is allowed to administrators only.

❒ The password is the same as the

one of Web Image Monitor admin-
istrator. When the password is
changed using "mshell", other
passwords change also.

❒ Some command cannot be set de-

pending on the model type.

Using telnet

Follow the procedure below to use
telnet.

Important

❒ Only one user at a time can log on

to perform remote maintenance.

AAAA

Use the IP address or the host name
of the machine to start telnet.

% telnet IP_address

BBBB

Enter your user name and password.
For details about the user name
and password, consult your net-
work administrator.

Note

❒ For user authentication, enter a

❒ For user code authentication,

enter a user code in [User Name],
and then click [OK].

CCCC

Enter a command.

DDDD

Quit telnet.

msh> logout

The configuration message about
saving the changes appears.

EEEE

Enter "yes" to save the changes,
and then press the

{# Enter} key.

If you do not want to save the
changes, enter "no", and then press
the

{# Enter} key. To make further

changes, enter "return" at the com-
mand line, and then press the

{# En-

ter

} key.

Note

❒ If the message "Can not write

NVRAM information" appears,
the changes are not saved. Re-
peat the procedure above.

❒ When the changes are saved,

the network interface board is
reset automatically with that
changes.

❒ When the network interface

board resets, the print job in print
process will be printed. Howev-
er, print jobs in queue will be
canceled.