Ricoh 3224C User Manual

Monitoring and Configuring the Printer

diprint

The direct printing port enables direct
printing from a network-connected
computer.
Use the “diprint” command to change
direct printing port settings.

❖

❖ View settings

The following command displays
the current direct printing port set-
tings:

msh> diprint
Example output:

port 9100
timeout=300(sec)
bidirect on

• The “port” specifies the port

number of the direct printing
port.

• The “bidirect” setting indicates

whether the direct printing port
is bidirectional or not.

❖

❖ Setting timeout

msh> diprint timeout {30–
65535}

• You can specify the timeout in-

terval to use when the printer is
expecting data from the net-
work.

• The default is 300 seconds.

❖

❖ Setting bidirect

msh> diprint bidirect { on
| off }

• You can specify whether the di-

rect printing port is bidirection-
al or not.

dns

Use the “dns” command to configure
or display DNS (Domain Name Sys-
tem) settings.

❖

❖ View settings

The following command displays
current DNS settings:

msh> dns

❖

❖ DNS server configuration

The following command enables or
disables the DNS server address:

msh> dns “number” server
“server address”
The following command displays
a configuration using the IP ad-
dress 192.168.15.16 on a DNS 1
server:

msh> dns 1 server 192.168.
15.16

• You can register up to three

DNS server numbers.

• You cannot use “255.255.255.255”

as the DNS server address.

❖

❖ Dynamic DNS function setting

msh> dns “interface_name”
ddns {on|off}

• You can set the dynamic DNS

function "active" or "inactive".

• {on} means "active" and {off}

means "inactive".

• ip1394 can be specified only

when the IEEE 1394 interface is
installed.

• wlan can be specified only

when the IEEE 802.11b interface
is installed.

Interface name

Interface configured

ether

Ethernet interface

ip1394

IEEE 1394 interface

wlan

IEEE 802.11b interface