Ricoh 3224C User Guide
Settings You Can Change with User Tools
61
4
Timer Settings
❖
❖
❖
❖ Auto Off Timer
After a specified time has elapsed following job completion, the machine au-
tomatically turns off in order to conserve energy. This function is called “Au-
to Off”.
The machine status after the Auto Off operation is referred to as “Sleep
mode”. For the Auto Off Timer, specify the time to elapse before Auto Off.
tomatically turns off in order to conserve energy. This function is called “Au-
to Off”.
The machine status after the Auto Off operation is referred to as “Sleep
mode”. For the Auto Off Timer, specify the time to elapse before Auto Off.
Note
❒ Default: 45 minute(s)
❒ Enter a time interval from 1 to 240 minutes, using the number keys
❒ Auto Off may not work when error messages appear.
❒ Enter a time interval from 1 to 240 minutes, using the number keys
❒ Auto Off may not work when error messages appear.
❖
❖
❖
❖ Energy Saver Timer
Set the amount of time the machine waits before switching to lower-power
mode after copying has finished or the last operation is performed.
The time can be set from 1 to 240 minutes using the number keys
mode after copying has finished or the last operation is performed.
The time can be set from 1 to 240 minutes using the number keys
Note
❒ Default: 15 minute(s)
❖
❖
❖
❖ Panel Off Timer
Set the amount of time the machine waits before switching the panel off after
copying has finished or the last operation is performed.
copying has finished or the last operation is performed.
Note
❒ The warm up time for making a copy from standby mode is 3 seconds for
Panel off Level 1 and 10 seconds for Panel off Level 2.
❒ Default: 60 seconds
❒ Enter a time interval from 10 to 999 seconds using the number keys
❒ Enter a time interval from 10 to 999 seconds using the number keys
❖
❖
❖
❖ System Auto Reset Timer
The System Reset setting automatically switches the screen to that of the func-
tion set in Function Priority, when no operations are in progress, or when an
interrupted job is cleared. This setting determines the system reset interval.
See p.55 “Function Priority”.
tion set in Function Priority, when no operations are in progress, or when an
interrupted job is cleared. This setting determines the system reset interval.
See p.55 “Function Priority”.
Note
❒ Default: On, 60 seconds
❒ The time can be set from 10 to 999 seconds, using the number keys
❒ The time can be set from 10 to 999 seconds, using the number keys
ThemisC1_EN_zentai_pre_FM.book Page 61 Thursday, June 30, 2005 8:21 PM