Ricoh 3224C Operating Guide

Appendix

144

❖

❖

❖

❖ Parallel Timing

Specifies the timing for the parallel
interface. Normally, you do not
need to change this setting.
• ACK Inside
• ACK Outside
• STB Down

❒ Default: ACK Outside

❖

❖

❖

❖ Parallel Communication Speed

Spec ifie s t he co mmunicatio n
speed of the parallel interface. If
the speed is too high, data may not
be transferred smoothly. If this
happens, change the setting to
“Standard”.
• High Speed
• Standard

❒ Default: High Speed

❖

❖

❖

❖ Selection Signal Status

Specifies the signal level of the par-
allel interface.
• High
• Low

❒ Default: High

❖

❖

❖

❖ Input Prime

Specifies whether the prime signal
is active or inactive when an input
prime signal is sent. Normally, you
do not need to change this setting.
• Effective
• Invalid

❒ Default: Invalid

❖

❖

❖

❖ Bidirectional Communication

Specifies, for instance, how a print-
er connected to the parallel inter-
face responds to a status request. If
you experience problems using an-
other manufacturer’s printer, set
this to Off.

❒ If set to Off, asynchronous com-

munication will not work.

• On
• Off

❒ Default: On

❖

❖

❖

❖ Signal Control

Specifies how to handle any errors
that occur when printing from a
computer. Normally, you do not
need to change this setting.
• Job Acceptance Priority
• Printer Priority
• Facsimile Priority

❒ Default: Job Acceptance Priority

ThemisC1EN-Print-F3_FM.book  Page 144  Friday, December 24, 2004  1:20 PM