Ricoh 3224C Reference Guide

Printing Options

99

When the size of a received message is
longer than the paper loaded in the ma-
chine, each page of the message can be
split and printed on several sheets, or
reduced and printed on a single sheet.
For example, this function splits the
message if the message length is 20mm
(0.79") or longer than the paper used.
The message is reduced if it is less than
20mm (0.79"). When a message is split,
an asterisk (*) is inserted at the split po-
sition and about 10mm (0.39") of the
split area is duplicated on the top of the
second sheet.

❒ Your service representative can

customize this function with the
following settings:
• Reduction
• Print split mark
• Overprinting
• Overprinting length
• Guideline for split

❒ You can adjust the overprinting

and reduction lengths within the
following ranges:
• Overprinting length: 4mm (0.16"),

10mm (0.39"), 15mm (0.59")

• Guideline for split: 5-155mm

(5mm steps)/0.2"-6.1" (0.2"
steps)

Normally, received pages are printed
and stacked on the tray in the order
they are received. If you turn this
function on, the machine will start
printing the message from the last
page received.

❒ You can turn this function on or off

using Reception Settings. See p.145
“Reception Settings”.

❒ When this function is on, the first

page will be printed last.

❒ This function uses Memory Recep-

tion.

ThemisC1_Fax_EN-F_FM.book  Page 99  Tuesday, January 11, 2005  4:59 PM