Ricoh 3224C Reference Guide
Administrator Setting
168
9
Changing the User Parameters
Preparation
Access to some User Parameter
Settings requires installation of op-
tional equipment, or that other set-
tings be made beforehand.
Settings requires installation of op-
tional equipment, or that other set-
tings be made beforehand.
Important
❒ We recommend you print and
keep a User Parameter list when
you program or change a User Pa-
rameter. See p.169 “Printing the
User Parameter List”.
you program or change a User Pa-
rameter. See p.169 “Printing the
User Parameter List”.
❒ Do not change any bit switches
other than those shown on the pre-
vious pages.
vious pages.
AAAA
Press the
{{{{User Tools/Counter}}}} key.
BBBB
Press [Facsimile Features].
CCCC
Press [Administrator Tools].
DDDD
Press [Parameter Setting].
EEEE
Select the switch number you
want to change.
want to change.
FFFF
Select the bit number you want to
change.
change.
When the bit number is pressed,
the current value switches be-
tween 1 and 0.
the current value switches be-
tween 1 and 0.
Note
❒ Repeat from step
F
to change
another bit number for the same
switch.
switch.
32
0 Quotation Priority for a desti-
nation when there is no desti-
nation of the specified type.
nation of the specified type.
Paper Output Pri-
ority <Priority Or-
der>
1. IP-Fax destina-
tion
2. Fax number
3. E-mail address
4. Folder
Electronic Output
Priority <Priority
Order>
1. E-mail address
2. Folder
3. IP-Fax destina-
tion
4. Fax number
34
0 Use gatekeeper server with
IP-Fax
Off
On
1 Use SIP server with IP-Fax
Off
On
Switch
Bit
Item
0
1
ThemisC1_Fax_EN-F_FM.book Page 168 Tuesday, January 11, 2005 4:59 PM