Ricoh 3224C Reference Guide
Checking and Canceling Transmission Files
24
2
Resending a File
Machine memory stores messages
that could not be successfully trans-
mitted using Memory Transmission.
Use this procedure to resend these
messages.
that could not be successfully trans-
mitted using Memory Transmission.
Use this procedure to resend these
messages.
Preparation
You should select “Store for 24
hours” for “Store a message that
could not be transmitted” in User
Parameters. See p.164 “User Pa-
rameters” (switch 24, bit 0).
hours” for “Store a message that
could not be transmitted” in User
Parameters. See p.164 “User Pa-
rameters” (switch 24, bit 0).
Note
❒ Files that could not be transmitted
will be kept for either 24 or 72
hours depending on how you pro-
gram this function. See p.164 “User
Parameters” (switch 24, bit 1).
hours depending on how you pro-
gram this function. See p.164 “User
Parameters” (switch 24, bit 1).
AAAA
Press [Change / Stop TX File].
BBBB
Press [Transmit Failed File].
CCCC
Select the file you want to resend.
“TX failed” is displayed for files
that could not be sent.
“TX failed” is displayed for files
that could not be sent.
Note
❒ If multiple destinations were
specified, only the destination
number appears.
number appears.
❒ If multiple destinations were
specified, only the number of
unsent messages appears.
unsent messages appears.
❒ To add a destination, press
[Add]
, and then specify the des-
tination.
DDDD
Press [OK].
Note
❒ To cancel transmissions, press
[Cancel]
. The display returns to
that of step
C
.
❒ Repeat from step
C
to resend
another file.
EEEE
Press [Exit].
The standby display appears.
Transmission starts.
The standby display appears.
Transmission starts.
ThemisC1_Fax_EN-F_FM.book Page 24 Tuesday, January 11, 2005 4:59 PM