Ricoh 3224C Reference Guide
Reception
85
5
Receiving messages unconditionally
If one of the conditions listed below occurs, the machine receives all fax messag-
es using Substitute Reception.
es using Substitute Reception.
Receiving messages according to parameter-specified settings
If one of the conditions listed below occurs, the machine receives only those mes-
sages that match the conditions specified in the User Parameters. See p.164 “Us-
er Parameters” (switch 05, bit 2,1).
sages that match the conditions specified in the User Parameters. See p.164 “Us-
er Parameters” (switch 05, bit 2,1).
You can specify the following conditions with the User Parameters. See p.164
“User Parameters” (switch 05, bit 2,1).
“User Parameters” (switch 05, bit 2,1).
Problems
Causes
Solutions
x is lit.
Paper is jammed.
Remove the jammed paper.
See “
xClearing Misfeeds”, General
Settings Guide.
The machine is printing
with other function.
with other function.
The machine is busy print-
ing with other function.
ing with other function.
The message will be automatically
printed after the current job finishes.
printed after the current job finishes.
The message “
Follow-
ing output tray is
full. Remove pa-
per.
” appears.
The output tray is full.
Remove paper from the output tray.
M is lit.
The cover is open.
Close the cover shown in the display.
Problems
Causes
Solutions
B is lit.
All trays out of paper.
Add paper. See “
BLoading Paper” ,
General Settings Guide.
D is lit.
Toner is empty.
Replace the toner cartridge. See
“
“
DAdding Toner”, General Settings
Guide.
Note
❒ As a quicker solution, use anoth-
er color of toner by changing the
color in “2nd Color Choice”. See
p.101 “2nd Color Choice”.
color in “2nd Color Choice”. See
p.101 “2nd Color Choice”.
The message “
This
tray is out of or-
der.
” appears.
All trays out of action.
Call your service representative.
ThemisC1_Fax_EN-F_FM.book Page 85 Tuesday, January 11, 2005 4:59 PM